Rim Tape 10m Roll

Product description

The Muc-Off Tubeless Rim Tape is made from our own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. It's semi-transparent material makes locating the valve hole easy. Supplied with 4x Seal Patches. Available in a 10m roll in 6 widths to suit most Road, CX, Gravel, MTB and Plus-sized rims.

FEATURES

• The tape itself is made from a semi-transparent material so that you can still easily locate your valve hole
• Infamous Muc-Off pink so even the inside of your rims stay looking fresh AF
• Comes with four seal patches, so you’re never caught short
• Comes in 6 different widths to suit most Road, CX, Gravel, MTB and Plus-sized rims
• Extreme strength and durability
• Pressure sensitive adhesive ensures the ultimate air-tight seal
• Engineered to stretch to fit perfectly in the contour of your rim
• Comes as 10m roll - allowing for 4 applications

SEE IT IN ACTION

Muc-Off Tubeless Rim Tape, 25mm - Pressure-Sensitive Adhesive Rim Tape For Tubeless Bike Tyre Setups - 10 Metre Roll With 4 Seal Patches

• Pressure-sensitive adhesive, creating the ultimate seal
• Semi-transparent to easily locate the valve hole
• Comes with 4x seal patches

HOW TO

• First up, clean your rim using our Glue & Selant remover to get rid of any unwanted residue that might be left behind from a previous setup
• Select the correct sized rim tape to match up with the width of your wheel's rim (check out our guide above)
• Locate the valve hole
• Peel back some of your Rim Tape and begin to apply and press down on the opposite side to your valve hole
• With your thumb holding down the tape, lightly peel the tape back and continue to press down to ensure you've got a firm bond with the rim itself
• Rotate the wheel around as you continue to apply the tape
• Once you've gone all the way around the rim, continue on to create an overlap of around 10 - 15cms
• Cut the tape at a 45 degree angle and press the edge down
• Check for any air bubbles and gaps, ensuring to press down firmly if you do spot any
• Apply the finishing patch over the edge of the tape to ensure a firm seal
• Push the valve through the rim hole and secure with the 'O' ring and locking ring
• Refit the tyre and inflate - you're now ready to add your sealant!